A box blade helps maintain gravel driveways, farm tracks and level areas by loosening high spots and carrying material into hollows. This guide explains how it works and what to check before choosing one for your tractor.

How a box blade works
The adjustable scarifying shanks loosen compacted material. The cutting edge then scrapes it into the box, where the side plates help retain it as the tractor moves forward. Material can fill low spots as it passes beneath the cutting edge.
The tractor's three-point linkage controls the working height. Top-link adjustment changes the box blade's pitch and how the cutting edges engage. Several light passes are often more manageable than trying to remove a large amount in one pass. Follow the implement and tractor manuals for setup and operation.

Choosing a suitable width and weight
- Tractor compatibility: Check the hitch category, the implement manufacturer's recommended tractor range and your tractor's lifting capacity. Horsepower alone does not confirm a suitable match.
- Width: Consider the width across the tractor's rear tyres. A blade covering the tyre tracks is useful, provided the tractor can safely handle its weight and draft load. Never drive close to an unsupported edge just to reach it.
- Ground conditions: Hard or compacted ground needs more pulling effort than loose gravel. Allow for traction, not just engine power.
- Wear parts: Check that cutting edges and scarifying tips can be inspected and replaced when worn.
Before adjusting or maintaining it
Park on firm, level ground, lower and safely support the attachment, apply the parking brake, stop the engine and remove the key. Keep hands and feet clear of the shanks and pinch points. Never work beneath an implement supported only by tractor hydraulics. Use the procedures in your specific operator's manual.
Sierra box blades in Australia
Compare the 5ft, 6ft, 7ft and 8ft Sierra box blades. See each product page for current Australian pricing, specifications and availability.
If you need help choosing, contact Implements Direct Australia with your tractor make and model, rear tyre width and the work you plan to do.